It can be not very pleasant to discover that the water closet is not working after relieving yourself. Don’t panic because not all toilet issues require calling a plumber. You only need to identify what is stopping the toilet from flushing and d the needful. You may have no idea how to determine the problems. That is why you are reading this. We will highlight the common issues that prevent the toilet from flushing.
Below are the possible reasons you should have in mind:
Clogged Toilet
Excessive use of toilet roll or accidental drop of nylon materials can clog the passage to empty your toiler bowl fully. When the problem starts, it may allow little water to pass through. But when blocked completely, nothing passes through until you remove the items clogging the toilet. To take care of the situation, you can get a toilet plunger to help push in the barricade forcefully, clearing the path for flushing.
Insufficient Water
Sometimes, no material prevents you from flushing but little water in the toilet tank. If the water doesn’t get to a certain level in the tank, there won’t be enough pressure to push in the waste. This issue usually arises when the water valve is not supplying water to the tank. It might be that someone turned it off unknowingly. Check to confirm that the water valve is rightly placed and provides water adequately. If it’s on and water fails to supply, you might need a technician to inspect your toilet.
Bent Flapper
The flapper can be why your toilet is not flushing, especially when it is not functioning correctly. The function of the rubber flapper is to supply water immediately the water in the toilet tank is below the specified line. When destroyed, it will automatically prevent water from entering the tank. Fortunately, replacing it won’t cost you a fortune. Additionally, you can do it yourself without involving a plumber. However, if you want to replace it, empty the tank to detach the old one and install the new one.
Lift Chain Malfunctioning
It should not surprise you that the lift chain can cause your toilet not to flush properly. That is the case when it becomes weak and can no longer lift the flapper. The possible solution to this issue is adjusting the chain length to enable raising the flapper for water supply for flushing. You will often need to shorten the lift chain to a suitable length for the flapper to work.
Get Your Toilet Fixed By Professionals
While the above problems are within the capacity of homeowners, some issues require that you consult a professional plumber. Suppose your toilet challenges don’t fall within the listed points. In that case, Elite Plumbing & Heating can assist you with befitting solutions for complex problems. Give us a call today! 781-438-2997
